SHAFT MOUNTED GEAR S Series [MOTOVARIO]

SHAFT MOUNTED GEAR (S Series)

Specifically designed for applications involving conveyors or augers, these units are also suitable for a wide variety of industrial fields.

The S series shaft-mounted gearmotor, available in cast iron from size 050 to 125, offers a wide range of reduction ratios, ensuring maximum efficiency in all operating conditions.

The new S Series includes two new sizes, 140 and 150, to extend the shaft mounting to heavier applications.

Sizes : 050-060-080-100-125

• Power from 0,12 kW up to 45 kW
• Reduction ratios between 4.06 and 394.69
• Torque max 9,500 N.m.
• Admissible radial loads max 30,000 N.
• Universal casing
• S..C Foot-flange mounting / Hollow shaft
• S..D Foot-flange mounting / Solid shaft
• S..L Foot-flange mounting / Shrink disc shaft
• Gearing with 2 and 3 reduction stages
• Modularity
• Gears hardened and tempered with shaved or ground profile
• Cases in EN-GJL-200 grey cast iron for high strength and optimized with FEM analysis
• Excellent mechanical strength
• Load capacity calculated to ISO 6336, DIN 3990 and AGMA 2001
• Painted with RAL 5010  blue  epoxy-polyester powder according to DIN 1843

Sizes : 140-150

• Power from 0,12 kW up to 45 kW
• Reduction ratios between 4.06 and 394.69
• Torque max 9,500 N.m.
• Admissible radial loads max 30,000 N.
• Universal casing
• S..C Foot-flange mounting / Hollow shaft
• S..L Foot-flange mounting / Shrink disc shaft
• Gearing with 2 and 3 reduction stages
• Gears hardened and tempered with ground profile
• Cases in EN-GJL-200 grey cast iron
• Load capacity calculated to ISO 6336, DIN 3990 and AGMA 2001
• Gearboxes supplied without lubricant
• Painted with RAL 5010  blue  epoxy-polyester powder according to DIN 1843